DIY Appliance Repair Tips

Wait! Before you decide to hire an appliance repair in Thousand Oaks for assistance, you can keep your appliances running smoothly with the help of some of the troubleshooting tips below.

1. Smelly Washing Machine

A unpleasant smell in your washing machine defeats the entire reason for the appliance! If you’re trying to get your clothes so that they are clean and fresh, but your unit won’t cooperate, run an cycle without clothes/laundry in hot water and pour in 2 cups of white vinegar and half of a cup of baking soda to eliminate the smell. This problem frequently occurs in front-loading machines. To prevent future odors, prop the door open after cycles to let it dry out.

2. Inefficient Refrigerant

A semi-cool fridge in the kitchen is never a welcome sign. A warm refrigerator definitely will not keep drinks cold or refreshing, and the food inside could also be close to going rotten! In some cases, your refrigerator might not require repair; instead it could just need a cleaning. Or the coils on the back panel of the refrigerator are in need of cleaning.

Unplug the refrigerator and move it out from the wall before cleaning the coils. If you do not notice cooling improvement, it’s a good idea to reach out to a professional appliance repair company in Thousand Oaks for a diagnosis.

3. Clicking Igniter on Stove

If the igniter on your gas-powered oven clicks nonstop and the burner does not light, look to make sure the burner cap is tightened and correctly aligned. You may notice this if you’ve had a recent boil over or liquid spill on your stove top.

Otherwise, the source is most likely to be a dirty igniter. To clean , remove the burner top and clear away any loose dirt. You can use a pin to pick dirt from the grooves of the igniter. If that does not fix the issue, it is wise to not take a lighter apart unless you have training; in this case hire a professional appliance repairman to investigate the problem.

4. Broken Garbage Disposal

Your garbage disposal includes self-protection with its own overload trip switch. If it gets filled up, overheats, runs for too long, or has a different issue, your disposal could just have to be reset rather than fixed. Be sure the power switch is turned OFF. Then, find the switch on the disposal beneath the sink and press the button. If the button will not stay pushed in, just wait 10 minutes and press it again. Now, turn on the water and then press the button on.

If the garbage disposal in the kitchen sink is filled up with food and you the only thing you hear is a humming sound and not waste grinding, you may need to manually twist the blades with a hex key tool to eliminate the jam. Next, push in the reset button to get the garbage disposal running again. If the tips above are unable to get things working like normal, please do not give in to the urge to stick one of your hands down in the disposal to investigate. Be smart and schedule service with a professional appliance repairman in Thousand Oaks.

5. No Power from Outlet

In a home’s kitchen or bathroom, the outlets should be installed with GFCI capabilities to protect people from harm in wet environments. If a GFCI electrical outlet isn’t generating power, press the red reset button to see if that restores juice.

If it does not, or if you are trying a basic outlet, be sure that a breaker has not tripped in the home’s circuit breaker box. If you are unsure if a breaker was tripped, switch it so it is in the OFF position and then flip it back to the ON position. Remember, safety near electricity is critical. Should you have any concerns, call a professional service.

6. Wobbling Washing Machine

A wobbling washing machine will produce quite a loud banging and isn’t a good way to wash clothing. If yours is abruptly shaking, the machine might be in trouble. In order to fix this problem, turn the legs on the unit to lift or lower all corners until it’s straightened out. Another likely situation is the appliance is off balance. Crack open the lid and rearrange the clothes so they are more evenly dispersed within the drum of the washer.

Doing this can help your washer not need to work as hard. If you attempt to move around the laundry a couple of times without luck, don’t ignore the problem. You might have a loosened drum or motor mount to fix, which is easy enough for a professional technician to repair. But continuing to use your washer when it has this issue might break some of the other pieces and result in a bigger repair over time.

Call for Help

If these tips fix your problems, you will want to schedule an appointment from J&L Thousand Oaks Appliance Repair!


Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts